WatchiTV Distributed
IPTV Network Monitoring Tool
Product overview
WatchiTV distributed is a passive, non-intrusive network monitoring tool that does not generate additional load on the network, yet focuses on all it's layers. It enables isolation of the root cause of a problem very efficiently. Thresholds exceeded will generate alarms and are forwarded to the central network management system where they are processed. SMS messages may then be sent to a mobile phone alerting you of an abnormal condition in the network.
Being non-intrusive, WatchiTV distributed is one of the most advanced IPTV network management solutions on the market today.
With this complete system, you are able to follow the traffic flow throughout the network from the head-end to the last monitoring point at the access network, before correlating all the information in order to verify the point in the network where the quality is degraded. This helps you to maintain the proactive edge of a QoS and QoE network.
Product features...
- Reporting by year, month, week, days, hours.
- Capture trigger before and after event.
- Simultaneous analysis of 64 streams per MPEG module (extendable by adding MPEG modules).
- Support for IP Unicast/Multicast Stream.
- Detailed Packet information.
- Web based interface for multi user access.
- Period per channel and network status reporting.
Watch iTV NMS
WatchiTV NMS is a centralization MPEG/Network management system which provides real-time monitoring and alarm, report functionality.
WatchiTV NMS Features
- SNMP network management system.
- Supports TCP/IP for WatchiTV MPEG configuration synchronization.
- Real-time alarm.
- Web base interface.
- Multi-authority access level control.
- Provide period channel and network status reports by Year, Month, Day.
- Stream copy and redirect for remote Content validation, Live video display.
- Supports NTP for network time synchronization.
- Remote access and login to WatchiTV MPEG for drill down to detail analysis.
WatchiTV ProMatrix-II
WatchiTV Promatrix-II is a passive, non intrusive network monitoring probe that enables you to focus on all layers and aspects of an IPTV network. The probe may be placed anywhere in the network - from core to edge to access networks - and monitor traffic levels according to pre-defined thresholds and generate alarms that may be forwarded to the network management system for centralised processing. WatchiTV ProMatrix-II may act as a stand alone data collecting engine or be a building block in a fully scalable and expandable managed IPTV network.
WatchiTV ProMatrix-II Features
- Support MPEG-2 TS (ISO 13818-1) over IP/UDP or IP/UDP/RTP Analysis - 10/100/1000Mbps.
- Support simultaneous analysis of 64 streams per MPEG module (extendable by adding MPEG module).
- Support of maximum UDP segment size (up to 32k byte, regardless of LIFO or FIFO stack implementation).
- Transmitted as IP fragments.
- Support IP Unicast/Multicast Stream.
- Throughput analysis of services and PIDs.
- TR101 290 health check support
- Priority I
TS_sync_loss, Sync_byte_error, PAT_error, Continuity_count_error, PMT_error, PID_error
- Priority II
Transport_error, CRC_error, PCR_error, CAT_error
- Priority III
NIT_error, SI_repetition_error, Unreferenced_PID, STD_error, EIT_error,RST_error, TDT_error
- Ethernet layer information:Transport_error, CRC_error, PCR_error, CAT_error
- CRC, Alignments, Over/Undersize, IP checksum error, dribble, pause package. - Packet Information:Transport_error, CRC_error, PCR_error, CAT_error
- Size, Fragment, broadcast/Multicast/Unicast, VLAN, SNAP, MPLS. - Capture Trigger before & after event, 8M Bytes of data per stream captured for further analysis.
