Manual Commands: G704 CAS abcd with Pulse Specification

Manual commands: The simulation commands on abcd signalling can be used if the profile includes specifications of abcd signalling mode for PRI EI or T1.

Signalling bit: A signalling bit MUST be selected.

Pulse low: Duration of state 0 within the pulse.

Pulse high: Duration of state 1 within the pulse.

Nb of pulses: Number of pulses which can be launched in sequence.

G704 channel: A channel number MUST be selected from the list of choices.

OK: This command causes the launch of a series of calibrated pulses (state 1 followed by state 0).

home     Quick start     Specifications     Connections     Features     How to?     Notes     Search     Site Map