QSIG Signalling Behaviour: Responder
Note: The items marked (emu) are relevant to the QSIG emulator
behaviour.
Accept incoming calls (emu): Configuration of the
Responder behaviour.
Incoming call rejected
Call clearing (emu): With the following step
in sequence:-
Incoming call accepted
Call establishment: With the following steps in sequence:-
Active state: With the specification of the source to be connected
and the duration.
- Connect... active source:
Source to be connected in the switched B channel(s) during the active
state of the communication:-
- Data state duration: If this duration expires, the call
is automatically cleared (an empty field means an infinite value of
time).
Call clearing: With the following steps in sequence:-
- If normal clearing, Send DISC/RELEASE:
Message transmission, depending on which party clears the call.
Access to edit the IE buffer attached to the DISCONNECT message.
- If resource unavailable, Send DISC/RELEASE:
Message transmission if resource unavailable (as channel or data source).
Access to edit the attached buffer of IE(s).
Copy/Paste functions
The Copy QSIG IE buffer and Paste QSIG IE buffer
functions allow you to duplicate the contents of a particular message
to another one (in the same profile or a different one).
| 
