Profile Editor: V5.x Specifications

V5 interface type: Selection of the physical interface type.

  • V5.1: Clarinet supports V5.1 interface
  • V5.2: Clarinet supports V5.2 interface.
    Allows you to configure 'Multi-clarinet' in simulation mode.
  • Emulation Mode: The behaviour of the Clarinet V5x interface.

  • Monitor: Clarinet analyse both directions of the interface between AN-LE
  • AN: Clarinet emulates the Adapter Network
  • LE: Clarinet emulates the Local Exchange
  • V5 edition: According to the edition of the ETSI standards.

  • Edition 1
  • ETS 300 324 for V5.1 : published feb. 94, amended jan. 96.
  • ETS 300 347 for V5.2 : published sept 94, amended may 97.
  • Edition 2
  • ETS 300 324 for V5.1 : published dec. 99.
  • ETS 300 347 for V5.2 : published jan 00.
  • Interface spec... Configuration of the physical (E1 Links) and logical (C-channels) interfaces.

    Emulator config... Specification of the parameters and options of the V5 protocol when Clarinet emulates a AN or LE.

    ISDN User-Port: ISDN configuration and behaviour of the ISDN Call simulation:-

    • Provisionned
      • Yes: One ISDN User Port is specified as provisioned.
      • No: No ISDN User Port is provisioned.
    • ISDN type
      • Basic access: The ISDN User Port emulates a BRI access
      • Primary access: The ISDN User Port emulates a PRI access
    • User Port Address: Value in decimal.
    • National Implementation of ISDN Q931
      • ETSI Basic, ETSI Specification ETS 300 403-7
    • Emulator config... Specification of the parameters of the ISDN Signalling protocols (Q921, Q931) when Clarinet emulates a AN or LE.
    • Signalling Behaviour Configuration of the ISDN Simulation defined by an automatic simulator.

    PSTN User Ports: PSTN configuration and behaviour of the PSTN Call simulation:-

    • Emulator config... Specification of the parameters and options of the PSTN Signalling protocols when Clarinet emulates a AN or LE.
    • Signalling Behaviour Configuration of the PSTN Simulation defined by an automatic simulator.
      • No: The simulator behaviour is de-activated.
      • Yes: The simulator behaviour is activated.

    Signalling Behaviour: Configuration of programmable simulation.

    • User Program: The simulation behaviour is carried out by the execution of a user-developed program in C language.
    • TTCN User Program: Simulation defined by Executable Test Suites resulting from TTCN compilation

     


    home     Quick start     Specifications     Connections     Features     How to?     Notes     Search     Site Map