Profile Editor: SS#7 Specifications
Interface init: Selection of the physical interface type.
Options: The options of the physical interface.
Emulation mode: The behaviour of the Clarinet interface:-
Interface spec... Configuration of the physical interface.
Behaviour of a signalling channel
The behaviour of each channel can be
independently defined:
Protocol variant: Type of implementation, which should
be in accordance with some filter specifications (protocol
parameters SS7 L3).
Emulator config... Relating to the selected channel.
When Clarinet emulates a Signalling Point, the specification of the parameters of the
signalling protocol (MTP-2, MTP-3, SCCP, ISUP, TCAP...).
ISUP. Signalling behaviour: Configuration of the simulation
(built-in simulator) on the selected channel:-
- Generator: Specification
of the outgoing calls of the SS#7 ISUP Call built-in simulator.
Yes: Further specifications are used. 
No: The generator behaviour is inhibited. The outgoing
calls are globally de-selected.
- Responder: Specification
of the behaviour of the SS#7 ISUP Call built-in simulator for incoming
calls.
-
Yes: An incoming call is accepted according to the further
specification.
-
No: An incoming call is rejected according to the further
specification.
- Miscellaneous:
Specification of various messages to be sent manually, and then initialising
a service.
User Behaviour: Configuration of the programmable simulation
on the selected channel:-
- User Program: The
simulation behaviour is carried out by the execution of a user-developed
program in C language.
- TTCN User Program:
Simulation defined by Executable Test Suites resulting from TTCN compilation.
| 
