Profile Editor: QSIG Specifications
Interface init: Selection of the physical interface type.
Options: The options of the physical interface. v
Emulation mode: The behaviour of the Clarinet interface.
Side: The side of PNX to manage call collisions (ISO/IEC 10.3)
Interface spec... Configuration of the physical interface.
Emulator config... When Clarinet emulates a User or Network
side, the specification of the parameters of the signalling protocol (Q921, QSIG).
Signalling Behaviour: Configuration of the simulation on
SL:-
- Generator: Specification
of the outgoing communications of the QSIG Call simulator.
No: The Generator behaviour is de-activated. No call
or connection will be launched during the profile execution.
Yes: The Generator behaviour is activated.
- Responder: Specification
of the incoming communications of the QSIG Call simulator.
-
No: The Responder behaviour is limited to marked items
'(emu)' relating to Incoming call accepted -
Call establishment or Incoming call rejected.
-
Yes: The Responder behaviour is activated.
- Miscellaneous:
Specification of various messages to be sent manually, and then initialise
the related service.
- X25 call simulator:
Specification of the X25 Call simulation on SL.
- User Program: The
simulation behaviour is carried out by the execution of a user-developed
program in C language.
- TTCN User Program:
Simulation defined by Executable Test Suites resulting from TTCN compilation.
Data Behaviour: Configuration of the simulation on DL:-
- Call simulator: Specification
of the Data call simulation on DL by an automatic simulator.
- User Program: The
simulation behaviour is carried out by the execution of an user-developed
program in C language.
- TTCN User Program:
Simulation defined by Executable Test Suites resulting from TTCN compilation.
| 
