Specifications: Clarinet Loader

Clarinet Loader

	Status	Status is displayed for each Clarinet module connected on the PC:
	Clarinet	The ID number of each Clarinet module connected to the PC (this is set by the coding wheel on the right hand side of the Clarinet unit).
	Detecting	The type of Clarinet module connected to the PC: First the type of interface to the PC (SCSI or USB). Then the type of Clarinet interface for the test application.
	Loading	The OK display indicates that the loading of the related Clarinet module has been successfully completed. (During the loading, a progress indicator is displayed at the bottom of the panel)
	Report	A detecting, checking, and loading sequence is carried out for the Clarinet module(s) connected to the Host PC.
	Successful loading	Here is an example of the display (with x as Clarinet ID of SCSI type and y as Clarinet ID of USB type) : Detecting .... -- Refresh SCSI device list .... -- Scan SCSI devices .... -- Scan USB devices .... Checking .... Loading .... Loading tac_isdn.cl4 on CLARINET board SCSI x Loading tac_usb.cl5 on CLARINET board USB y Waiting before Check .... Checking .... END: result in file tac_clef.aci Then the Window is automatically closed. Results as type, ID and loaded file are saved in the file tac_clef.aci (in Clatools directory).
	Unsuccessful loading	An error window is displayed, which must be acknowledged by the operator. See Troubleshooting for Clarinet-Book SCSI or USB type.
	Detecting without Refresh SCSI device list	The Clarinet Loader program (\Clatools\wac_load.exe) must be launched with the parameter '-s'. The command line in the shortcut becomes: path\Clatools\wac_load.exe -s The following detecting sequence is displayed : Detecting .... WARNING: Use "Device Manager" to refresh SCSI device list -- Scan SCSI devices .... -- Scan USB devices .... Checking ....

Boot Updating (Clarinet-Book SCSI type)

The BootUpdate is automatically launched by the Clarinet Loader when the Flash Memory of the Clarinet module is to be updated (only from software versions 8.4 and greater).

	Status	Status is displayed for each Clarinet connected to the PC:
	Clarinet	The ID of the Clarinet unit connected to the PC (set by the coding wheel on the unit).
	Type	Type of Clarinet connected to the PC.
	Ser. number	Serial number of Clarinet connected to the PC.
	Current ver.	Initial Boot version of Clarinet connected to the PC, before BootUpdate processing.
	Target ver.	Target Boot version which will be applied by the BootUpdate.
	Updating	The OK display indicates that the updating of the related Clarinet has been successfully completed.
	Report	A detecting, and updating sequence is carried out for the Clarinet(s) connected to the Host PC.
	Successful loading	Here is an example of the display : Search Clarinet Books -- Host Adapter: 0 -- Host Adapter: 1 ----> ID:1 E1 1045 4.0 25 Read configuration File -- tac_bv2.cl4: 4.0 25 -----> 1.0, 1.1, 1.2, 1.3, 1.4, 2.0, 2.1, 2.2, 3.0, 3.1, 3.2, 3.3, 4.0 25 -- tac_bv3.cl4: 4.0 33 -----> 4.0 33 Updating old version boot End of Updating The trace can be copied (by Ctrl C) and pasted (by Ctrl V) in a text format for further reporting.

home Quick start Specifications Connections Features How to? Notes Search Site Map