ISDN Signalling Behaviour: Communication
Starting delay: Initial waiting time-period between the
starting of the execution of the profile and the launching of the communication
(an empty field means an infinite value of time).
Execution number: Number of consecutive executions of the communication;
must have a finite, non-null value.
Delay between exec: Delay between the end of the previous execution
and the launching of the next execution of the communication.
Call establishment: With the following steps in sequence:-
- User indication: Character string included in a traffic
event generated at the beginning of each execution of the communication.
- Send SETUP... Message transmission.
Access to editing the attached buffer of IE(s).
- Send INFORMATION... An optional
sequence of INFORMATION messages can be automatically transmitted.
- Establishment source: See the choice
list.
Source to be connected in the switched B channel(s) during the establishment
state of the communication.
Active state: With the specification of the source to be connected
and the duration.
- Active source: See the choice
list .
Source to be connected in the switched B channel(s) during the active
state of the communication.
- Data state duration: If this duration expires, the call
is automatically cleared (an empty field means an infinite value of
time).
Call clearing: With the following step in sequence:-
Copy/Paste functions
The Copy ISDN IE buffer and Paste
ISDN IE buffer functions allow you
to duplicate the contents of a particular message to another one (in the
same profile or a different one).
With Active indication only for active source
|
None |
No data source connected. |
|
Loop |
Data echoed TD-RD. |
|
Handset |
To use the telephone handset
(Speaker + Micro) connected to the HANDSET connector.
A Cofidec resource is automatically connected and used. |
|
Analog 1 |
Analog Input/Output 1 available on the I/0 connector.
A Cofidec resource is automatically connected and used.
* Not supported by Clarinet-Book USB type. |
|
Analog 2 |
Analog Input/Output 2 available
on the I/0 connector.
A Cofidec resource is automatically connected and used.
* Not supported by Clarinet-Book USB type. |
|
BERT 511 |
Bit error rate test - 511 bits pattern. |
|
BERT 511+ |
Bit error rate test - 511 bits
pattern with error counter details. |
|
BERT 2047 |
Bit error rate test - 2047 bits pattern |
|
BERT 2047+ |
Bit error rate test - 2047 bits
pattern with error counter details. |
|
BERT 2**15 |
Bit error rate test - 32767 bits pattern. |
|
BERT 2**15+ |
Bit error rate test - 32767
bits pattern with error counter details. |
|
TRANSIT |
TRANSIT interface with selection of the used
TS's. |
|
TRANSDATA |
TRANSDATA interface with automatic
TS switching from/to the current interface. |
| Active |
Data user program |
To enable the use of the Data user program as
specified in the Data User Program
panel. |
|
Cofidec 1 |
Digital input/output of the Cofidec 1. |
|
Cofidec 2 |
Digital input/output of the Cofidec 2. |
| Active |
Data X25 simulator |
To enable the use of the X25 call simulator as
specified in the Data Call simulator
panel. |
|
Byte-TS /Wav |
Byte-TS or wav file selected from a choice list.
64 Kbits data source (as speech, ...). |
| Active |
Data FR simulator |
To enable the use of the Frame Relay call simulator
as specified in the Data Call simulator
panel. |
| Active |
Data IP simulator |
To enable the use of the IP call simulator as
specified in the Data Call simulator
panel. |
| Active |
PESQ |
Wav file selected from a list (64 Kbits data
source).
PESQ measurement is carried out on the Tx/Rx data flows at the
end of the profile execution according to the following settings:
- Analog properties set
in the Protocol filter defined within the profile
- configuration file set as WI_ANALOG by Clarinet-Init
|
|
Source selection: For some data source type, a complementary
selection area must be accessed.
-
- Related topics:
- Q931 Simulator: sources in
Time-Slots
- ISDN Simulation: BERT source
operation
| 
