E1/T1 (Trunk/ISDN/QSIG/SS7) & ISDN-BRI Interface Specifications
- TRANSDATA
Emulation mode: Behaviour on the Transdata interface:-
- Simulation: Setting up an external data-sink-source
in connection with some selected TS's from the current BRI-PRI interface:
- some TS's received will be switched to the R output circuit of
Transdata.
- the T input circuit of transdata will be switched to some transmitted
TS's.
- Analysis: Setting up a data output interface in connection
with some selected TS's of the current BRI-PRI interface:-
- some TS's from the Network/NT input of the current interface will
be switched to the R output circuit of Transdata.
- some TS's from the User/TE input of the current interface will
be switched to the T output circuit of Transdata.
Channel specification: Allotment of a TS or a set of TS's of the
current interface.
The number of TS's must be identical in both directions.
- T time-slot(s):
Selection of the TS's which are permanently connected to the T circuit
of Transdata.
- R time-slot(s):
Selection of the TS's which are permanently connected to the R circuit
of Transdata.
-
- Related topic:
- TRANSDATA connection
| 
