|
| |
ISDN S0-T0 Interface Options
Generic options: Options for the Clarinet interface (whichever
emulation mode is used)
- Power source 1 monitoring: To monitor the phantom power
source.
- Power source 2 monitoring: To monitor the auxiliary
power source.
- 100 ohms termination on bus: To connect 100 Ohms terminations
on the bus.
- Multi-frame: Multi-frame management (bits Fa and N)
defined in paragraph 6.3 of the I430 recommendation.
- Level 1 measurement, one option must be selected:
- No measurement: no test.
- Send single zeros: Generation of calibrated pulses
on the interface (monitoring must be off).
- Send continuous zeros: Generation of calibrated
pulses on the interface (monitoring must be off).
User specifications: Options to be used if the Clarinet
interface emulates a User side.
- High priority class: To select High Priority Class.
- T3 time-limit: Value of T3 time-limit defined in the
I430 recommendation.
If it is equal to 0, the time-limit is not used.
Network specific options: Options to be used if the Clarinet
interface emulates the Network side.
- Short passive bus, for bus configuration:
Yes: Short passive bus mode.
No: Self-adapting bus mode.
- Connect power source 1 on bus: To connect the external
power source 1 on the bus.
- Invert polarity on power source 1: To invert the polarity
of the external power source 1.
|
