|
| |
IP Profile Editor: Protocol Stacks
Protocol layer items: The layers for use in the
protocol stack are displayed at the left of the window.
- You can select layers and add them to the top of the protocol stack
using the Add button.
- Some layers may be unavailable for selection depending on what layers
have already been added to the stack.
Protocol Stack: The current protocol stack. The
stack can be modified to include more or less layers by adding (Add
button) or removing (Remove button) them at the top position.
Add: To add a protocol layer item to the top
of the protocol stack.
Remove: To remove the top layer from the protocol
stack.
IP profile selection status:-
There are different types of protocol stacks available according to the
Clarinet interface type in use:
- IP over Ethernet: On Clarinet LAN (Ethernet
AUI, 10B2, 10BT), and based on MAC IEEE 802.3 frames.
- IP over V120: On Clarinet ISDN (E1, T1, U,
S/T with ISDN protocols or Trunk E1/T1), and based on V120 frames in
a bearer channel.
- IP over PPP: Based on PPP frames in a bearer
channel.
On Clarinet ISDN (E1, T1, U, S/T with ISDN protocols or Trunk E1/T1)
or Clarinet Vseries.
- IP over ATM: On Clarinet ATM (E3 and STM1/STS3c).
|
