Filter Editor: IP Address Value
Selecting conditions can be defined by value(s) (see features).
Counting specifications (for Statistics) can be defined by value(s)
(see features).
An address configuration includes a Source address and a Destination
address which are linked with a logical AND operation.
Additionally a Subnet Mask can be defined and applied to extend the source/destination
address configuration to an address range configuration.
List of address configuration(s): One or several
address configuration(s) can be defined and used as selecting conditions:-
- Source address of configuration i:
The address format is xxx.xxx.xxx.xxx (xxx as a decimal value modulo
256). An empty field denotes any address value.
- Destination address of configuration i:
The address format is xxx.xxx.xxx.xxx (xxx as a decimal value modulo
256). An empty field denotes any address value.
- Subnet Mask of configuration i: The
mask format is xxx.xxx.xxx.xxx (xxx as a decimal value modulo 256).
255.255.255.0 value as an example, extends the selecting condition from
a precise address of a subnet to the whole range of addresses ending
from 0 to 255.
An empty field means that no mask is used.
 Active
Yes: Value condition i
is selected and applied. Active
No: Value condition i is
not selected and not used.
| 
