|
| |
Filter Editor: U Decoding
Selecting
- All: All of the conditions are selected.
- None: None of the conditions are selected.
- Power source i (1 or 2): To enable
selecting conditions on all events relating to Power source i
(1 or 2).
No: None of the selected conditions are applied
to related events.
Yes: The selected conditons can be used on
the related events.
- TE/NT states: To enable selecting conditions
on all events relating to either TE or NT states.
-
No: None of the selected conditions are applied
to the related events.
-
Yes: The selected conditons can be used on
the related events.
- TE/NT M4 bits: To enable selecting conditions
on events relating to either NT or LT M4 bits.
-
No: None of the selected conditions are applied
to the related events.
-
Yes: The selected conditons can be used on
the related events.
- Conditions: One or more conditions can be
independently selected in the list, but according to whether power source
1/2 are currently enabled, NT/LT states and NT/LT M4 bits.
-
No: The condition is not selected (default).
-
Yes: The condition is selected.
List of conditions
- Power source i (1 or 2): Selecting
conditions on events reporting a state modification of Power source
i (1 or 2).
- Don't care: Any modification.
- Not monitored
- Off: Modification to off state.
- On: Modification to on state.
- Inverted: Modification to Inverted state.
- NT/LT states: Selecting conditions on events
reporting a modification of the NT/LT state.
- Don't care. Any modification of the NT/LT state.
- Idle: Modification to the Idle state.
- Activated: Modification to the Activated
state.
- Synchronized: Modification to the Synchronized
state.
- NT/LT M4 bits
- M4 bit: Modification of the related M4
bit.
|
