ATM VCC
Usage: for the current VCC:-
AAL type: and relevant parameters of the panel are used.
PDU max length: for the VCC receive connection.
Cell header: used for each ATM cell for the VCC. (transmit and
receive connections)
- GFC: Binary value. x for mask use in monitoring.
- VPI: Decimal value.
- VCI: Decimal value.
- Set CLP bit
Yes: The CLP bit is set to 1.
No: The CLP bit is set to 0.
Rate mode: (for the VCC transmit connection)
- VBR: The attached I and L GCRA parameters will be in
use.
- Increment. Values according to ATM UNI 3.1 Generic
Cell Rate Algorithm specifications, and defined in cell slots +
thousands (max 16383.999).
- UBR: see specifications.
AAL 3/4: parameters for the current VCC, if this AAL type is
used:
- Enable CRC10 field checking: (receive connection)
-
Yes
-
No
- Enable BASIZE checking: (receive connection)
-
Yes
-
No
- Significant bits for MID field: (receive connection)
- MID processing disabled
- 1 active bits
- ...
- 10 active bits (1-1023)
- MID value: (transmit and receive connections)
- CPI value: (transmit connection)
- Initial SN: (transmit connection)
AAL 5: parameters for the current VCC, if this AAL type is used:
- UU value: (transmit connection)
| 
