How to ?

Content:

• How to:
  • Set up your Clarinet
    
    
• How to test:
  • ISDN
  • QSIG
  • SS7
  • Trunk E1/T1
  • ATM
  • V5
  • Vseries
  • Frame Relay
  • X25
  • IP
  • VOIP
    
    
• How to edit:
  • Protocol events

Setting up your Clarinet

• Installing the Clarinet System
• Automatic Clarinet Loader
• Selecting the Clarinet Program
• Configuration and troubleshooting
• Testing your Clarinet_Book
• Listing my Clarinet software configuration

How to test ISDN

• Monitor ISDN-BRI over S-T Bus or U 2B-1Q
• Monitor ISDN-PRI over E1 or T1
• Advanced monitoring:
  • Monitor BOP protocol (X25, FR, PPP...) over one B channel
  • Listen to voice/tones over one B channel
  • Monitor digital content of voice over one B channel and generate Byte-TS
• Simulate one ISDN basic call as a User to the Network over S-T bus, U2B1Q
• Simulate one ISDN basic call as a Network to the User over S-T bus, U2B1Q
• Simulate one ISDN call as a User to the Network over E1, T1
• Simulate one ISDN call as a Network to the User over E1, T1
• Advanced simulator:
  • Reply continuously to incoming SETUP
  • Add more calls to the simulation
  • Define a traffic simulation
  • Add / modify IE in the SETUP
  • Manage calls timing with manual commands
  • Send messages (RESTART, FACILITY) with manual commands
  • Select the TS number from the Channel ID
  • Transmit / Receive DTMF tones over one B channel of an outgoing call
  • Transmit / Receive DTMF tones over B channel of an incoming call
  • Transmit DTMF tones over B channel of any incoming call
  • Connect the Handset over one B channel of an outgoing call
  • Connect the Handset over one B channel of an incoming call
  • Transmit / Receive Byte-TS / Wave file over ISDN interface
  • Connect the Handset to the B channel during establishment time
  • Measure G821 BERT over one B channel
  • Connect the Transdata to the B channel
  • Connect the Transit of PRI interface to the B channels
  • Trigger Outgoing calls from Incoming calls
  • Simulate X25 over the D channel
• Displaying events ...
• Advanced processing:
  • Generate wav files
  • Generate QoS events

How to test QSIG

• Monitor QSIG over E1 or T1
• Simulate one QSIG basic call as a User to the Network over E1
• Simulate one QSIG basic call as a Network to the User over E1
• Advanced simulator:
  • Simulate one QSIG GFT call as a User to the Network over E1
• Displaying events ...

How to test SS7

• Monitor SS7 protocol over two TS's of E1 or T1
• Advanced monitoring:
  • Listen to voice/tones over one B channel
  • Monitor digital content of voice over one B channel and generate wav files
• Simulate an SS7 call over E1, T1
• Advanced simulator:
  • Simulate additional calls
  • Add / modify parameters in the IAM
  • Manage timing calls with manual commands
  • Define a traffic simulation
  • Send messages (CONTINUITY...) with manual commands
  • Reply continuously to incoming IAM
  • Connect the Handset to one voice channel
  • Connect DTMF tones over one voice channel
• Displaying events ...

How to test Trunk E1/T1

• Monitor HDLC frames over Trunk E1 / T1
• Advanced monitoring:
  • Monitor CAS
• Simulate BERT over E1 / T1 trunks
• Advanced simulation:
  • Simulation of Loop: selection of TS loop Transmit to Receive
  • Simulation using TRANSIT: selection of TS transferred to TRANSIT
  • Simulate CAS with manual commands
  • Aggregate TSs for simulation of n x 64k
• Displaying events ...

How to test ATM

• Monitor PDUs over STM1/E3 interface
• Advanced monitoring:
  • Monitor IP over STM1
• Simulate Q2931 over STM1
• Advanced simulation:
  • Simulate Frame Relay over STM1
• Displaying events ...

How to simultaneously test SS7 and ISDN

• Monitor SS7 and ISDN over E1 or T1
• Simulate an SS7 and ISDN call over E1, T1

How to test V5

• Monitor V5 over a single E1
• Advanced monitoring:
  • Monitor V5 protocol over a set of E1
• Simulate one PSTN call from a V5.1 AN over a single E1
• Simulate basic calls from a V5.2 AN
• Simulate basic calls from a V5.2 LE
• Advanced simulator:
  • Simulate V5.2 protocol over a set of E1's
  • Simulate additional calls
  • Simulate PSTN calls in responder mode only from a V5.2 LE
  • Manage timing calls with manual commands
  • Define traffic simulation
• Displaying events ...

How to test Vseries

• Monitor HDLC over V24
• Advanced monitoring:
  • Monitor HDLC over V11 at 8 Mbits/s
• Simulate BERT over V24
• Advanced simulation:
  • Simulate protocol
• Displaying events ...

How to test Frame Relay

• Monitor Frame Relay
  • over V24
  • over E1/T1
  • over ATM
• Simulate Frame Relay User side
  • overV24
  • over E1/T1
  • over ATM

How to test X25/X75

• Monitor X25
  • over V24
  • over E1/T1
  • over ATM
• Simulate X25 DTE
  • overV24
  • over E1/T1
  • over ATM

How to test IP

• Monitor IP over Ethernet
• Monitor PPP & IP over V24
• Simulate IP over Ethernet
• Simulate IP over V24

How to test VOIP

Useful VoIP application assistance notes

• Monitor H323 over Ethernet
• Monitor SIP over Ethernet
• Advanced monitoring:
  • Remove RAS decoding over wrong UDP port
• Simulate an endpoint H323 over Ethernet
• Simulate an endpoint H323 over Ethernet in Fastart mode
• Simulate SIP User-Agent over Ethernet
• Simulate SIP User-Agent with Proxy over Ethernet
• Advanced H323 simulator:
  • H323 simulation: edit ASN1 content of the messages
  • H323 simulation: add / modify parameters in the SETUP of outgoing calls
  • Add more outgoing calls
  • Reply continuously to incoming SETUP
  • Add / modify parameters in the H225 messages replying to incoming calls
  • Modify fastart in the H225 messages replying to incoming calls
  • Manage timing calls with manual commands
  • Define a traffic simulation
• Advanced SIP simulator:
  • Simulate SIP and RTP over Ethernet
• Displaying events ...
• Advanced processing:
  • Generate wav files
  • Generate QoS events

How to edit protocol events

• General:
  • Editing an event file
  • Samples of an event file
  • Find any string in the displayed events
  • Print and copy events
• Display conditions:
  • Filter according to a string
  • Filter by level
  • Change the decoding mode
• Selecting events by Filter conditions:
  • Filter by using Filter Set
  • Filter by selecting type of messages
  • Filter by selecting values of a field

Miscellaneous

• Editor dialogue rules

Home     Quick start     Specifications     Connections     Features     How to?     Notes     Search     Site Map